View Full Size

u have an ufc cable no need to soldring the pinout, just put then automatic detected by gpgdragon 100%

If you make Rj45 cable for rx/tx
Here is diagram

DOWNLOAD

iH8sn0w has released Sn0wbreeze 2.6.1, which will allow Verizon iPhone 4 users to jailbreak their iPhone on iOS 4.2.7, which was released by Apple couple of weeks back.
Sn0wbreeze 2.6, which was released last week already allows GSM iPhone users who want to jailbreak and also unlock their iPhone to update their iPhone with a pre-jailbroken iOS 4.3.2 firmware while preserving the baseband from getting upgraded so that it can be unlocked using Ultrasn0w.

iH8sn0w has provided the following information in the release notes:

Well, after i0n1c released his untether exploit for 4.3.1, Apple shortly pushed out 4.3.2 AND 4.2.7. i0n1c’s payload was ported over to 4.3.2 in a short period of time but not 4.2.7. This made Verizon users very frustrated.

I originally ordered a Verizon iPhone 4 for my upcoming SHSH blobs dumper. Then I + many others on twitter realized that an untether was not available for 4.2.7. Over the past few weeks, I’ve been sick and didn’t do much, but today I was finally able to get the strength to work on this Verizon untether. Since i0n1c’s payload is not easily reversible, I went to previous exploits.

After trying, pod2g’s + posixninja’s kernel exploit for 4.2.x is STILL in

4.2.7! After some more work, I managed to get this thing untethered!

So, this new release includes that new payload to untether + jailbreak 4.2.7.

So Sn0wbreeze 2.6.1 now supports an untethered jailbreak for iOS 4.3.2, iOS 4.2.7 and supports the following devices:

• GSM Phone 4, Verizon iPhone 4, iPhone 3GS
• iPod touch 4G, iPod Touch 3G
• iPad 1

Sn0wbreeze 2.6 doesn’t support iPad 2 yet. Sn0wbreeze 2.6.1 also allows users to enable four and five finger multitouch gestures, which are only available to developers of iOS developer program.
iPad, iPod Touch and iPhone users who don’t care about unlocking are better off using Redsn0w as one doesn’t need to preserve baseband like iPhone users.

You can download Sn0wbreeze 2.6.1 from iH8sn0w’s website,,

Full View

STOOL2 v091373
For SonyEricsson LG3G and sharp

SEMC Features
LG Supported Models:-
U8110, U8120, U8130, U8138, U8180, U8330 and U8380

Sharp Supported Models:-
V801SH, V802SH ,V902SH and V903SH

SonyEricsson Supported Models:-
F500i, J300i, J300c, K300a, K300c, K300i, K500a, K500c, K500i, K506c, K508c, K508i, K600c, K600i, K608i, K700c, K700i, K750i, K750c, S600i, S700c, S700i, S710a, V600i, V800i, V802SE, W800c, W800i, Z500a, Z500c, Z500i, Z800c, Z800i, Z1010c and Z1010i

MXBOX powered by HTI (High Tech Interface)
STANDALONE SX4AUTH, SD REPAIR, SIMLOCK REPAIR,
NCK CALC, SL3 HASH CALC and SL3 NCK CALC

Buy MXBOX only from:
MXBOX authorized distributors and resellers list

DIRECT LINK for DOWNLOAD MXKEY V3.4 revision 2.0 – MXBOX READY
http://www.mxkey.biz/mobileEx_setup_v3.4_rev2.0(20110420).exe

MXKEY v3.4 revision 2.0 – MXBOX READY

** Initial release which support MXBOX/HTI FLASHER

NK(Nokia Service Tool)
- Added, SIMLOCK_PA idendifier on BUS check option in config
- Added, STANDALONE SX4AUTH,SD REPAIR,SIMLOCK REPAIR,
NCK CALC,SL3 HASH CALC and SL3 NCK CALC for MXBOX/HTI FLASHER
– Added, flash update v11.10.000.2 to setup
– Fixed, BB5 manual flash erase (NAND)
– Fixed, Old Infineon flashing bug
– Fixed, some bugs

SL3BF updated to version 3.1
* support for oclHashcat-lite-0.03 and ighashgpu_v0.80.16.1
- additional files are required to use this version
– oclHashcat-lite-0.03 (http://hashcat.net/files/oclHashcat-lite-0.03.7z)
- please extract all contents to directory(see readme.txt)
“\modules\{3EBAF427-9F55-419F-8A75-385DFC651169}\sl3bf\oclHashcat-lite-0.03″
– ighashgpu_v0.80.16.1 (http://golubev.com/files/ighashgpu_v0.80.16.1.zip)
- please extract all contents to directory(see readme.txt)
“\modules\{3EBAF427-9F55-419F-8A75-385DFC651169}\sl3bf\ighashgpu_v0.80.16.1″
– command line and others option could be adjusted by editing sl3bf.dat at
“\modules\{3EBAF427-9F55-419F-8A75-385DFC651169}\sl3bf\sl3bf.dat”
– by default we will use “oclHashcat-lite-0.03″, which is support newest AMD GPU(HD6xxx)

QCD (CDMA Service Tool)
- Added, Flashing support for:
TELEEPOCH based products (Haier C710)
TECHFAITHWIRELESS based products (Haier C200,C2000,C6200,CG100,C2001,C5000 and soon)
TCLMOBILE based products (Alcatel OT-203C, Nexian NX981)
ZTE QSC11x0 products (S168,S189)
ZTE QSC6030 products (C36X)
– Added, Patch definition update button from config
– Added, SPC code extraction from image file
– Added, ROM,EFS base address detection from image file
– Added, Auto image base address set for full dump image
– Added, CDMA NAM read/write support
– Added, image(bin) file load/save support
– Added, Copy to clipboard and Paste from clipboard for EFS function
– Improved, Flashing(Read/Write) speed
– updated patch definition to version 1.1
see “modules\{9A05071F-D3A6-484B-8E3E-C6F47311C78C}\supported_phones.txt” for list supported models

Supported CDMA phones for Unlock

- Huawei

#Old Models (Disable MINLock NVM)
#Unlock by Patch:
C2206-B102
C2601-B105
C2601-B106
C2606e-B102
C2606e-B104
C2607-B105
C2801-B103
C2801-B105
C2801-B106
C2801-B108
C2801-B109
C2801-B110
C2802-B102
C2802-B104
C2802-B106
C2802-B107
C2802-B108
C2802-B109
C2802-B114
C2802-B201
C2806-B103
C2806-B104
C2807-B102
C2807-B103
C2807-B105
C2807-B201
C2807-B301
C2807-B302
C2822-B207
C2906-B105
C2906-B106
C3308-B106
C3308-B107
C5005-B115
C5005-B117
C5100-B102
C5100-B201
C5589-B115
– ZTE
#Disable MINLock NVM:
C322
C321
C339
C306
C332
C335
C330
C366
S100
S130

Supported models for unlock by Patch:
HAIER CM100
CM100_ID_SMART_ST7735_V2.9
CM100_ID_SMART_ST7735_V3.1
HAIER EC5115
EC5115_ID_ESIA_V2.69
EC5115_ID_ESIA_V2.68
HAIER C8989
C8989-SP-R00.00.26-Flexi
C8989-SP-R00.00.33-Flexi
HAIER EC2828
EC2828-P0.00.17_V00.17-Esia
HAIER C200
HTC200MRT02
HAIER C2000
HA2000MT06
HAIER C300
HAC300MV02
HAC300MV03
HAC300MV04A
HAIER C2030
HA2030MT04
HAIER C3010
HA3010MT06
HAIER C2040
HA5000MV06
HA5000MV05
HAIER CG100
HACG100MT04
HAIER C2040
HA2040MT04
HAIER C5100
C5100-HSP-R00.00.37-MTS
HAIER C6300
C6300-HSP-R00.00.36-MTS
C6300-HSP-R00.00.37-MTS
ALCATEL OT-203C
QSC6010-CS08-3350

MX-KEY official web sites:
International – MXKEY Homepage (in construction)
Indonesia – MX Key INDONESIA WebSite
India – MX Key INDIA WebSite
Russia – MXKey RUSSIA WebSite

MX-KEY official support forums:
World Wide: MXKEY (by Alim Hape) – GSM-Forum
Indonesia: MXKEY Dongle
Philippine: Gsmph
Arabic world: ÏäÛá Çã ÇßÓ ßí (MX-KEY)

NEW – Pakistan: MXKEY (by Alim Hape) NEW

NEW – FARSI (Persia/Iran): MXKEY (by Alim Hape) – FARSI (Persia/Iran) Official Support Forum NEW

!!! MXKEY – MXBOX – CATCH ME IF YOU CAN !!!

BR,
Manole
GSM: +8613077861111
ICQ: 66-11-11
YM: manole4000
MSN: manole@manole.ro
SONORK: 100.88888
Web Page: Manole

Popularity: 4% [?]

Full View

4Shared.com:

MediaFire.com

You need winrar,winzip or 7zip to view or extract these files.Each zip file contains readme file, read it to know exisitng contents in zipfile.
TDS Tool:
It is a free and standalone application made by gennie to calculate rpl for dct4 and dct4+ mobiles.

Nokia jaf bb5sl2:
As all of you know abot jaf bb5 sl2 unlocker cracked version made by raskal team cracked by zulea.

Infinity dct4 rsa unlocker:
Rsa unlocker for unlocking dct and dct4+ applications using com emulater on ufs and jaf both are supported.

Dejan Sl3 Logger:
Recently dejan released his unlocker for unlocking sl3 mobiles.Method is typical you need to visit tutorial url as given in rar file.(Jaf interface required)

gsm hub bojos:
A great bunch of diffrent applications created by bojos free for gsm world.

Ufs Com emulater:
As majorty of people already know about it but for beginners i want to explain it. Com emulater is used to make an interface useable for other devices like i have added infinity dct4 unlocker it supports only com interface.you have to activate comemulater on ufs or jaf than these devices will become comport now you can use infinty unlocker just refresh comport connect mobile with ufs or jaf and press unlock thats it.

BB5 security code via usb:
Reove bb5 mobiles through usb.

SE.simlock patch genrater:

This application can generate SIM-Lock remover vkp patches that you can use with SETool2 Lite, Far Manager with SEFP(Sony Ericsson Flash Plugin) and compatible tools. It is able to generate vkp patches for DB2010/DB2012 CID 49/50/51/52 MAIN firmwares(*.mbn, *.bin), but at the moment(dec. 2007) you can apply patches to DB2010 CID49 platform only(for free). You can also apply patches to any DB2010 CID49 cross flashed phone (e.g. DB2010 CID49 K310@W200).

It’s always a good idea to do a format once every few month or even when you first get your new device.

There’s two ways to do a hard format to the device memory:

1). Once the device is powered on and at the home screen type ***7370** and then enter your security code (default is 12345) and then your device will restart and reset.

2). To hard reset, follow the steps below.

Full View

Full View

Popularity: 6% [?]